What is Network Reliability in UC Platform

Besides the platform, a key component to success is the quality of the network on which the platform will function.

In this blog article we will analyze which network devices must be chosen carefully, and which technologies we need to be familiar with to successfully deploy our UC solution.

Firewall / Routers

As seen in Reviewing Security Concerns of UC solutions, we should consider firewalls and routers only as support for enforcing security. The UC server and the connected devices must be secure, even in the absence of dedicated devices such as firewall / SBCs with packet inspection capabilities. This is achievable only by applying the best practises and security policies inside the UC solution.

Continue reading “What is Network Reliability in UC Platform”

Using SIP Trunking In A Modern UC Solution

SIP Trunking

SIP Trunking is the most popular way to add PSTN connectivity to a modern UC solution.

A few words of advice:

  • Fax support: if the UC solution will need to transfer faxes, you need to make sure the operator has official T.38 capability.
  • Routes quality: these should be extensively tested over national, mobile, and international destinations for the following:
    • Audio quality
    • Connection speed
    • CID shown on the remote side
  • Set custom outgoing CID: a great feature for mobility and call forwarding

Continue reading “Using SIP Trunking In A Modern UC Solution”

Getting To Know VoIP Devices Of UC Solution

The biggest factors to consider when choosing devices that will connect to your UC solution are: determining the required installation time and avoiding installation-related issues (lengthy installations, device-related errors, etc.).

FXS / ATAs

Ideally, all devices connected to a modern UC server should be IP endpoints (PCs or SIP Phones).

In practice, there are many reasons to stick to analog FXS ports to connect analog devices:

  • Users do not need advanced features on their endpoints
  • Most fax machines have no built-in VoIP capabilities and require an ATA
  • Analog modems connections
  • Substituting many twisted pair cables with CAT-5 or CAT-7 cables might be:
    • Too expensive
    • Not possible because the resulting Ethernet cable would be longer than the maximum allowed Ethernet length (100 meters)

In such cases, the easiest way is to connect an ATA, which is a converter between SIP VoIP and analog interfaces.

Continue reading “Getting To Know VoIP Devices Of UC Solution”

How to extend the functionality of SIP phones

In the previous blog article (Insight into the user endpoint) I listed user endpoints. This time I am going to characterize what advanced services can be implemented via SIP phones.

Feature Keys

On legacy systems and modern VoIP systems, feature keys can implement a large set of services:

  • BLF (Busy Lamp Field), which displays the status of colleagues
  • Parking slots
  • Speed dial
  • Send DTMF
  • Trunk / line monitoring and use

Verify how many of these keys your users will need. Also, consider the possibility of providing such advanced services via the UC Client. For example, the user can own a basic VoIP phone for calls but manage all other operations (presence, monitoring, etc.) via the UC client on the PC.

Continue reading “How to extend the functionality of SIP phones”

Insight into the user endpoint

The user endpoint subject will be covered in this blog article. And I will also describe the importance of collaboration tools and desk phones.

Collaboration Utility / Softphone

In a modern UC solution, a single application should incorporate all services: audio calls, video calls, chat, and presence. The advantages of this arrangement include:

  • A unified user experience
  • Less investments in dedicated hardware such as VoIP phones, which are not necessary
  • Immediate sign-on after opening the application

At the same time, having just one application that incorporates all services poses the following problems :

  • It requires the computer and app to active (turned on)
  • It relies on the computer’s environment.
  • It might not be user-friendly for customers using older versions.

Continue reading “Insight into the user endpoint”